MCS2000 Codeplug
Posted: Sat Jun 17, 2006 8:30 am
I'm in need of MCS2000 Model 2 DOS Archive Codeplug for M# M01KHM9PW5BN . If Anybody can help. Thanks
Haloncloud
David
Haloncloud
David
Page 1 of 1
Posted: Sat Jun 17, 2006 2:02 pm
I may be able to help. I need to double check model number
MCS2000 Codeplug wanted!
Posted: Sat Jul 29, 2006 1:56 pm
Hi there, I am searching the same codeplug for my MCS2000 VHF!
I programmed it with the WOOKIE software, and now it's a paperweight!
(
i need that Codeplug for try to program an other codeplug into it, maybe it will function again!
Franz
I programmed it with the WOOKIE software, and now it's a paperweight!
(i need that Codeplug for try to program an other codeplug into it, maybe it will function again!
Franz
Re: MCS2000 Codeplug
Posted: Sat Oct 05, 2013 3:24 am
Sorry to drudge up and archive but I am REALLY in need of a blank CPG for the same model radio (M01KHM9PW5BN). I have acquired one filled with Victoria CFA programming that doesn't want to talk nice to CPS and whilst wookie can see the serial and model numbers it is hopelessly lost as to what it is and cries corrupt.
Re: MCS2000 Codeplug
Posted: Sat Oct 05, 2013 6:11 am
tsunami_australia wrote:Sorry to drudge up and archive but I am REALLY in need of a blank CPG for the same model radio (M01KHM9PW5BN). I have acquired one filled with Victoria CFA programming that doesn't want to talk nice to CPS and whilst wookie can see the serial and model numbers it is hopelessly lost as to what it is and cries corrupt.
Is this a case where your software is not new enough to work with the radio you have???
Jim
Re: MCS2000 Codeplug
Posted: Sat Oct 05, 2013 7:29 am
Shouldn't be since I'm running iirc CPS2.03 which is supposed to be the latest.
Been a weird radio, Wooky reads it only partly (model and serial but nothing else and doesn't know how to handle the model) so I assumed not MC2100. I can a weird no user input for block 23 error reading off MCS2000 CPS. The radio tx's and rx's fine but does not start up like my R split. My r split is the usual with the mpl socket and standard startrunk / omni-link equip but this VHF unit starts with extra beeps and states "CONVENTIONAL" on the screen before loading channels. It also has a BNC antenna socket. Sticker under says made in EC.
So neither the MCS CPS nor MC2100 suggested wooky will read this thing.
Been a weird radio, Wooky reads it only partly (model and serial but nothing else and doesn't know how to handle the model) so I assumed not MC2100. I can a weird no user input for block 23 error reading off MCS2000 CPS. The radio tx's and rx's fine but does not start up like my R split. My r split is the usual with the mpl socket and standard startrunk / omni-link equip but this VHF unit starts with extra beeps and states "CONVENTIONAL" on the screen before loading channels. It also has a BNC antenna socket. Sticker under says made in EC.
So neither the MCS CPS nor MC2100 suggested wooky will read this thing.