Batboard

ok, I'm new at this so dont laugh, I have a mts2000 flashport 900Mhz my question is simple, its range is 896-941Mhz, so if it will recieve 896, is there anyway of making it receive 851?? without losing its tx/rx on 900? I want to use this as a 900 portable but would also be nice to monitor the local 800Mhx TRS, so again dont laugh, but is it possible??

1)-no, the front end filter won't go that far.
2)-there's the toolproofing issue, assuming your MTS2000 is a real MTS and not some hackjob with an MTX controller
3)-buy a scanner. unless your authorized to be on a trunked sys, illegally programming a radio on someone else's TRS is retarded. besides no system admin in their right mind would cut on a frankenstein radio like that anyway.

ok, now can someone a little less professional and a little more open minded answer my question please?

Everything MTS2000des said was 100% accurate.

To elaborate more on his last point, you will not find anyone here to assist you with any endevour to illegally program a radio to scan a TRS for which you are unauthorized to be on. No one here wants to be an accessory to a Federal crime.

guys........all I asked is if it was possible, what a bunch of close minded yahoos....thanks for the help.

ok, i'll be nice about it.


there is no way your 900 radio can function far enough below it's rated bandsplit to function on an 800Mhz trunking system.




doug