GP340 always beeping button/keypad alert error ???

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
Spirit
Posts: 2
Joined: Wed Jun 21, 2006 12:26 pm

GP340 always beeping button/keypad alert error ???

Post by Spirit »

I have one new GP340 wich always beeping and flashing red-green led when is turned on, and that's all what this device do. That problem persist from the first time I powered on this radio.
The first thing I did is programming channels and flashing with new firmare. Everything passed ok, but GP340 still beeps.
I tryed with disabling alerts and found that this is button/keypad error alert. I checked all 5 buttons, and diodes near buttons, and all are ok. Then I changed cpu with new one, and still have the same problem :(

Does anybady know if it is hardware or software problem and how to solve that problem?
Top
Spirit
Posts: 2
Joined: Wed Jun 21, 2006 12:26 pm

Post by Spirit »

Anybady?
Please help!
Top
Andreas
Posts: 626
Joined: Sun Sep 09, 2001 4:00 pm
What radios do you own?: radios

Post by Andreas »

This means codeplug error.
Load a default codeplug from the RSS and program the radio.

Andreas
Top
User avatar
HLA
Posts: 2334
Joined: Mon Jul 11, 2005 8:15 pm
What radios do you own?: HT1550's, X9000's, CDM1550's

Post by HLA »

what was the original firmware in the radio and what did you update it to?
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”