Page 1 of 1
MT1000 accessory adapters???????
Posted: Mon Jul 10, 2006 3:25 pm
by Robert HT220
Just got a question regarding the MT1000/HT600/P200 accessory port adapters. I found one on ebay and was wondering what it was for? I want one that has the external antenna jack, but I don't know if this is it, or what the heck this one is for?
Posted: Mon Jul 10, 2006 4:13 pm
by Will
Robert,
That one is for the HiRose connector.
I have some NIB audio/earphone adaptors. They can be rewired for RF antenna jacks.
Posted: Mon Jul 10, 2006 4:14 pm
by kb0nly
Looks like a Hirose adapter by the size of the connector covered by the rubber cap.
You can reassign the pins on any of them and install a BNC chassis mount connector in the top to make an rf adapter, that's how i make them.
I can check and see if i have enough spare parts to make another rf adapter.
MT1000
Posted: Tue Jul 11, 2006 9:05 am
by 1 Adam 12
The factory adapter for the MT will have a symbol of a "Y" on it, and I have seen them both with BNCs and jack plugs.
Posted: Wed Jul 12, 2006 6:43 am
by wa2zdy
An RF adaptor with a BNC? NLY if you're making them let me know how much.