Page 1 of 1
SmartZone programming question
Posted: Thu Jul 13, 2006 2:17 pm
by bellersley
Hi all. When a radio is programmed in a smart zone system and there is no site lock/unlock button, is it safe to assume that the site is always unlocked, allowing the radio to automatically switch sites? This is on a radio authorized to be on the system.
Posted: Thu Jul 13, 2006 2:57 pm
by Bruce1807
That is correct.
We used to have a lock button programmed but took it out after officers complained of dropouts. They were usually locked onto a far away site
Posted: Thu Jul 13, 2006 3:05 pm
by bellersley
Excellent, thanks! Is there a way to lower the RSSI treshold at which the radio starts to look for another site? The system in question has several sites rather close together...
Posted: Thu Jul 13, 2006 3:29 pm
by VE9MP
In RSS atleast, not sure about CPS, go from the main menu to F4>F4> F2> F2
That will take you to your Smartzone Environment screen, there you can change your RSSI thresholds...