Batboard

Has anyone installed a CIM-1000 in a Maratrac?

I had some issues with 2 yesterday that were acting pretty goofy...

At first I was having PTT problems, but after a little trouble shooting I fixed that, but now the FSK burst out of the radio sounds like crap...

I have the data out connected correctly to where Cim says it goes... but they may be wrong...

KuhnElectronics wrote: I have the data out connected correctly to where Cim says it goes... but they may be wrong...

Where din Cim say to connect the PTT and the DATA out?

now that i am home i dont have the install sheets in front of me,

however i did remember that both of those connections were made on transistors if that makes a difference...

Did you adjust the deviation in the CIM-1000 programming?