Page 1 of 1
Pro series radio USB programming cable.
Posted: Mon Jul 17, 2006 2:01 pm
by Alex663
My old serial cable for programming HT1250's etc... is showing its age and I want to get a new cable. Ive noticed ebayers selling USB versions but when I look in my CPS R06.06.00 i only see selections for com ports, not USB. So my question is, which cable should I get? Id like USB so I dont have to break out my serial card and dongle all the time, but if the USB requires hacks or anything I dont want to waste my time. Thanks for any input.
Alex
Posted: Mon Jul 17, 2006 2:55 pm
by Bruce1807
never heard of one yet.
Pros still need a rib and a serial port for genuine use
Posted: Mon Jul 17, 2006 2:58 pm
by Alex663
Auction # 170008586291
Posted: Mon Jul 17, 2006 3:33 pm
by thebigphish
ahhh kawarad....
they always seem to have the strangest "built to OEM specs" things out on the market. Usually it's a crap-shoot. I had one kawa-cable that worked fine, then got a second one that was crimped on backwards. I learned my lesson and bought original, or if it was a patch cable ... made my own.
Posted: Tue Jul 18, 2006 1:17 am
by mr.syntrx
The unofficial USB cables tend to just have a USB<->RS232 chip inside, so they show up on the computer as a serial port.
Posted: Tue Jul 18, 2006 3:15 am
by Bruce1807
I mean USB is becomming the go. I bought an HP about a year ago to do programming and unpacked it at the office and no com port.
Anyonr that flashes XTS1500/2500/5000 radios knows how much quicker the USB port is.
Thank god the USB cable is out for the XTL series now, (supported by the latest CPS).
I figure one more year and all my Com port sradios have been replaced. It's then time to buy a Microsofts Ultra PC.
Quantar should go to USB in the next release.