Page 1 of 1
RICK QUESTION
Posted: Fri Jul 28, 2006 12:24 pm
by Enrique Torres
HELLO AGAIN, I THINK I DID NOT MAKE MYSELF CLEAR, I NEED TO KNOW HOW DO I PROGRAM THE RADIOS ( OPTIONS ) ANY SPECIAL SETTINGS.
THANKS AGAIN
Posted: Fri Jul 28, 2006 4:30 pm
by HLA
be more clear, which radios are they and what's the rest of the setup?
Posted: Fri Jul 28, 2006 7:32 pm
by ve3nsv
If memory servers me right,
Receive Radio
Pin 8 COR/ CSQ-PL Detect
Filtered Audio
Transmit Radio
Pin 3 Ext Mic PTT
Ext Mic Audio
Posted: Sat Jul 29, 2006 6:21 am
by Enrique Torres
THANKS FOR ANSWERING, I AM GOING TO USE TWO VHF M208 RADIOS, WITH VHF DUPLEXER AND THE RICK AND OF COURSE A MOBILE MAXRAD 5/8 ANTENNA, WITH THIS STUFF CAN I MAKE A DECENT REPATER? ANY SPECIAL SETTING WHEN PROGRAMMING, THE RADIOS?
Posted: Sat Jul 29, 2006 9:42 am
by HLA
ok then the earlier post is correct, set the recieve radios pin 8 to cor/csq pl detect and the transmit radio can stay just how it is. you will need to set the dip swithces in your rick to make it work the way you want and then you will have to have the duplexer tuned and make shure your antennae has a good ground plane and get it mounted as high as possible.