Another lame astro saber question.......

saberjerk · Post by **saberjerk** » Wed Aug 02, 2006 4:59 pm

This may seem pretty obvious to most but will a standard saber public
service mic work on the astro digital saber? Hopefuly without frying something?
Thanks

jnglmassiv · Post by **jnglmassiv** » Wed Aug 02, 2006 5:16 pm

It won't work. The non-pub safety ones will, though.

saberjerk · Post by **saberjerk** » Wed Aug 02, 2006 6:21 pm

ok, well maybe I don't know what I have here. The mics are NMN6128B
Will these work?

jnglmassiv · Post by **jnglmassiv** » Wed Aug 02, 2006 6:37 pm

I'm not up with the model numbers but if an antenna can be screwed to the mic, it won't work.

saberjerk · Post by **saberjerk** » Wed Aug 02, 2006 7:02 pm

These don't have the antenna. So I guess these should work.
Thanks a lot guys.

Tom in D.C. · Post by **Tom in D.C.** » Thu Aug 03, 2006 5:06 am

The speaker/mic will work fine. However, you must change the
antenna extender for the top of the radio to the reverse SMA
type as used by Motorola. If you have the part you just unscrew
the original Saber adapter and screw on the SMA adapter for the
Astro Saber antenna. If your speaker/mic is missing the thingie
that extends the antenna then you just use the same antenna
arrangement as when you're not using the speaker/mic.

Another lame astro saber question.......

Another lame astro saber question.......

AS Speaker/Mic