Batboard

Hi guys,

I have recently purchased a motorola programming jig for the GP300/P110. It works great but it didn't come with the adaptor plate for programming GP350's. Does anybody have the part number so I can order it from motorola.


Thanks,

Jamie

I don't know if there is a kit number but you need two pieces.
RLN4514 and RLN4515.

L.E.

You don't really need two pieces if you are managing both models. You can just use the GP350 adapter plate for the radio, and put a GP300 battery on the battery side.

Don't need anything extra but jumper wires for the serial port and battery hook-up off the GP300 programming adapter.

Bat2way wrote:Don't need anything extra but jumper wires for the serial port and battery hook-up off the GP300 programming adapter.

Yah, a good way to brick your radio.

... and not a lot of fun when you're doing a couple of hundred at a sitting.