Batboard

I want to program several remote mount mobiles 403-430 Mhz with conventional only, however there are 3 trunking systems in the radio, how can I remove these systems.

Call the federal technical center in Lanham. Give them the model number of the unit and ask them to send/e-mail you a test code plug. If they happen to ask why you need it tell them the radios are being trasfered/surplused so you get a clean code plug. Make the changes you want and load the modified test code plug.

Well, I am sorry to say that you are incorrect. I just removed the trunking systems with our in house software. Thanks for your help though. I called FSG and they walked me thru the procedure.

I know, better late than never, but there's a procedure (or steps) that explain how to do that in this article:

http://www.repeater-builder.com/motorol ... opics.html

Bob M.

Thanks dick. You ask I gave you a way (the easiest way BTW) that would work without knowing your level of experiance with the software and you have the intestional fortitude to tell me I was wrong. Next time figure it out yourself.

Is it really necessary to namecall. I was sincere in thanking you for your tips, no need to start getting upset, and call names.

Also thanks Bob, I just looked at that site and that is exactly what I did.

Maybe I have you confused with someone else with a similar username on another group, I thought I was calling you by name. Sorry for the confusion.

Yep you must have me mixed up with someone else. Thanks for the clarification.

Alrighty then...

Problem solved. Thread locked.