Minitor V On/Off Duty Problem & Solution

This forum is focused on discussing Digital and Voice paging equipment, protocol's, infrastructure, and Motorola specific hardware used. Please refrain from discussing different ways to monitor the digital paging systems due to the legalities of such.

Moderator: Queue Moderator

Post Reply
jantman
Posts: 68
Joined: Mon May 22, 2006 11:05 am

Minitor V On/Off Duty Problem & Solution

Post by jantman »

Just as an FYI for anyone who has the same problem:

My organization recently purchased the Motorola software & hardware to program our Minitor V's.

We were having problems with the on/off duty setting for each channel. When we set it to "off", it would reset itself to "On". It was not uploading to the pager, or saving in the file.

If anyone else is having this problem, upgrading to the Minitor V PPS v. 1.4 (available on their web site) fixed it.
Top
HRN
Posts: 120
Joined: Sun Feb 26, 2006 8:35 pm

That's correct

Post by HRN »

The original version that was released did not work with on/off duty. You have to have a later release and that is fixed.
Top
Post Reply

Return to “Motorola Digital and Voice Paging”