How Much?
Moderator: Queue Moderator
-
- Posts: 439
- Joined: Mon Feb 20, 2006 5:42 pm
How Much?
I picked up a couple of MTS2000 A7's with the 403-470MHz split a while back for a couple hundred dollars each. I'm really impressed with the features and quality of these radios and the fact that they were made here in the U.S.
I got wondering last night after having the radios programmed and using them for a couple of days, just how much they cost new when they were still in production.
I saw a list somewhere awhile back (I thought it was here on BatLabs) that had the prices of old Motorola equip. when that equip was still in production.
Anyone know where I can find such a list? OR, anyone know the cost new of an MTS 2000, UHF 403-470MHz with a full keypad?
Just curious... Thank you,
I got wondering last night after having the radios programmed and using them for a couple of days, just how much they cost new when they were still in production.
I saw a list somewhere awhile back (I thought it was here on BatLabs) that had the prices of old Motorola equip. when that equip was still in production.
Anyone know where I can find such a list? OR, anyone know the cost new of an MTS 2000, UHF 403-470MHz with a full keypad?
Just curious... Thank you,
Terry
-
- Posts: 439
- Joined: Mon Feb 20, 2006 5:42 pm
What's the flash...
it'll be a ######-######-# type number that comes up after FLASHCD is shown on the screen (or something similar.)
The firmware version is what you posted, which is a good version to have - but the flash determines cost.
-Alex
it'll be a ######-######-# type number that comes up after FLASHCD is shown on the screen (or something similar.)
The firmware version is what you posted, which is a good version to have - but the flash determines cost.
-Alex
The Radio Information Board: http://www.radioinfoboard.com
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
-
- Posts: 439
- Joined: Mon Feb 20, 2006 5:42 pm
- VE9MP
- NOT ALLOWED TO BUY/SELL/TRADE
- Posts: 429
- Joined: Wed Jan 05, 2005 11:38 am
- What radios do you own?: FPP Railroad XTL9000 Cleancab
A7 MTS? Whats the model number? It should have a W1 in it....
Sounds to me that perhaps you have a MT2000 with a MTS sticker on it...
Sounds to me that perhaps you have a MT2000 with a MTS sticker on it...
-----Nick-----
"I can trip some repeaters in Maine, but I'm not getting any audio into it, is there some type of tone frequency I use? If so do you know what one is for Maine?" - The SMT Machine
"I can trip some repeaters in Maine, but I'm not getting any audio into it, is there some type of tone frequency I use? If so do you know what one is for Maine?" - The SMT Machine
-
- Posts: 439
- Joined: Mon Feb 20, 2006 5:42 pm
Well gee, I don't know what the heck I have here? I should have said that they are MTS2000 Type III's instead of A7's.
OK, I've got two supposedly MTS2000 Type III's. After pushing the monitor button 5 times here is what's displayed:
On The First Radio;
Service>
R05.44 >
HO1RDH9PW1BN>
466AVN2291>
RF Test. Then stops scrolling
On The Second Radio;
Service>
R05.53>
HO1RDH9PW1BN>
466AWG5310>
RF Test. Then stops scrolling
These numbers match the tags exactly on both radios except the first radio has an X following the serial no. on the TAG, and the second radio has a Z following the serial no. on the TAG.
The tags on both radios indicate that they are MTS2000's. The FCC ID no. is AZ489FT4781, which coincidently is exactly the same as the FCC ID on my KNOWN TO BE MT2000's.
Anybody got a clue as to what these really are?
OK, I've got two supposedly MTS2000 Type III's. After pushing the monitor button 5 times here is what's displayed:
On The First Radio;
Service>
R05.44 >
HO1RDH9PW1BN>
466AVN2291>
RF Test. Then stops scrolling
On The Second Radio;
Service>
R05.53>
HO1RDH9PW1BN>
466AWG5310>
RF Test. Then stops scrolling
These numbers match the tags exactly on both radios except the first radio has an X following the serial no. on the TAG, and the second radio has a Z following the serial no. on the TAG.
The tags on both radios indicate that they are MTS2000's. The FCC ID no. is AZ489FT4781, which coincidently is exactly the same as the FCC ID on my KNOWN TO BE MT2000's.
Anybody got a clue as to what these really are?
Terry
- spectragod
- Posts: 2029
- Joined: Sun Dec 30, 2001 4:00 pm
- What radios do you own?: FPP 6 meter XTL 5K's
..
depending on the contract, your radios were in the high $1900-2200ish range when new.
your radios have NO flashcode. they are just basic 160 channel conventional models without trunking... hence, no display.
doug
your radios have NO flashcode. they are just basic 160 channel conventional models without trunking... hence, no display.
doug
BRAVO MIKE JULIET ALPHA
"You can do whatever you want, there are just consequences..."
IF SOMEONE PM'S YOU - HAVE THE COURTESY TO REPLY.
"You can do whatever you want, there are just consequences..."
IF SOMEONE PM'S YOU - HAVE THE COURTESY TO REPLY.
I beg to differ.
With firmware version of 5. 44 he will not see the flashcode on the display.
Have an MTS2000 800 mhz with 5.44 firmware that DOES NOT SHOW the flashcode on the display in the test mode. Shows up in the RSS.
If the factory tags are black (not the white reprints the Depot puts on), check the lower left corner (very bottom) there may or may not be a 13 digit number (that is where the flashcode appears on my radio)
If I'm not mistaken the flashcode didn't start showing up in the "test" mode until version 6.xxx
Tony
With firmware version of 5. 44 he will not see the flashcode on the display.
Have an MTS2000 800 mhz with 5.44 firmware that DOES NOT SHOW the flashcode on the display in the test mode. Shows up in the RSS.
If the factory tags are black (not the white reprints the Depot puts on), check the lower left corner (very bottom) there may or may not be a 13 digit number (that is where the flashcode appears on my radio)
If I'm not mistaken the flashcode didn't start showing up in the "test" mode until version 6.xxx
Tony
-
- Posts: 439
- Joined: Mon Feb 20, 2006 5:42 pm
OK, I have black factory tags on both radios and the 13 digit number in the lower left corner on both of those tags is 000004-000000-6.talviar wrote:
.... If the factory tags are black (not the white reprints the Depot puts on), check the lower left corner (very bottom) there may or may not be a 13 digit number (that is where the flashcode appears on my radio). ....
Tony
So, I reckon that is the flashcode.
Next question; What does this flashcode mean?
BTW, thanks to you guys who replied. The seemingly insignificant answers and comments you provided here is newly learned knowledge/information for me... and for that I am grateful!
Terry
-
- Posts: 439
- Joined: Mon Feb 20, 2006 5:42 pm