Page 1 of 1
Power cube for RLN4008B
Posted: Mon Aug 28, 2006 5:21 pm
by Garyf629
Lost the power cube (wall wart) for my Motorola Rib box. Can anyone supply me the specs? i.e. volts, mah ,tip polarity...
Thanks
Posted: Mon Aug 28, 2006 5:54 pm
by HLA
9 volts, 500ma would work fine. tip is positive. you do know you can use a 9v battery too right?
Posted: Mon Aug 28, 2006 7:25 pm
by phrawg
Not necessarily, There are ribs out there that had no provision for
a 9 volt battery. Just a blank opening in the bottom.
Posted: Tue Aug 29, 2006 3:25 am
by Bruce1807
Blank opening is generally SmartRib
Posted: Tue Aug 29, 2006 7:06 am
by jackhackett
This is what I've been using, I've been using one for 3 years now, works perfectly and they come with the proper plug for the moto rib already on them.
http://www.mouser.com/search/refine.aspx?Ntt=412-109033