Page 1 of 1
GM300 Remote head?
Posted: Tue Aug 29, 2006 1:26 pm
by flamewild
Does anyone know of a kit to make your GM300 have a remote head? I want to mount the radio in my new truck, but the hole is not deep enough for the radio. I was wandering if there was a wiring harness or something you could use to mount the radio somewhere and have the head somewhere else? Any help would be greatly apprieciated. I love this radio, but I might have to change to a M1225 to get it where I want it.
Posted: Tue Aug 29, 2006 2:35 pm
by jim
The QuickMount kit is what you are looking for.
Posted: Tue Aug 29, 2006 5:24 pm
by Max-trac
Or Moto HLN8144B
Or the LONG kit, HLN8143B.
The one for the Maxtrac is different.
Posted: Tue Aug 29, 2006 7:17 pm
by Dennis
Try this link, have had one for seveal years and it works great.
Dennis
http://www.valleyindustrial.com/quickmount/default.htm
Posted: Thu Sep 07, 2006 3:37 am
by Paul
I fabricated an extension cable with off-market connectors & flat ribbon cable for a customer's vehicle and works great.
Some minor extra work is needed for the speaker cable, that is connected directly on the pc board.
I also used the two remaing holes on the head to fix it on the dashboard ,with long self-screwing screws.
Update: You are talking about GM300, so forget the extra work for the speaker cable (Maxtrac only), since GM300 uses the head's connector.