Batboard

Posted: **Thu Oct 18, 2001 10:30 am**

All;

Can the RLN4008B RIB be used in place of the Universal Interface for programming pagers (specifically, the FLEX pager)? I have the 4008B RIB and can fabricate a cradle easily.

The pager in question has 2 pins, as does an original cradle. I'm assuming one is GND and the other BUS+ or something similar; anyone know which is which?

Thanks,

Tom WA8PYR

Posted: **Thu Oct 18, 2001 10:37 am**

Not sure if you can, but would also like to know about using that RIB for Min III programming. Thanks

Posted: **Thu Oct 18, 2001 7:26 pm**

NO the RLN4008B can not be used to program pagers the electronics and how the pagers are read is much different than the radios but i belive you can get a ribless cable for the minitor 3 not sure on the part number check with Motorola Support 18004224210 prompt 3 then 2

Batboard

4008B RIB for pager programming?