Page 1 of 1
CPS for CP200
Posted: Thu Sep 07, 2006 9:11 am
by rfd366
Does anyone know what version of CPS I need to program a CP200?
Posted: Thu Sep 07, 2006 9:44 am
by escomm
Depends on the firmware of the radio.
Having the most recent CPS (I believe its R05.05) should ensure backwards compatibility, but the older versions definitely will not work with the current firmware revisions.
Re: CPS for CP200
Posted: Wed Jul 04, 2007 12:37 pm
by KitN1MCC
does the CP200 take the same CPS as the Waris ht1250 as an Example
Re: CPS for CP200
Posted: Wed Jul 04, 2007 12:51 pm
by RadioSouth
RVN4191A CP150/CP200/CM200/CM300 + a few others (Believe it's called Commercial Series CPS)
Re:
Posted: Wed Jul 04, 2007 4:55 pm
by ve3nsv
R05.06 is actually the latest version out.
escomm wrote:Depends on the firmware of the radio.
Having the most recent CPS (I believe its R05.05) should ensure backwards compatibility, but the older versions definitely will not work with the current firmware revisions.
Re: CPS for CP200
Posted: Fri Aug 03, 2007 12:01 pm
by LBeauc7769
I have a PR-400 and I am trying to reprogram it. I have the CPS Verison 5 and it starts to read the codeplug and when it gets to 25% it stops and says there is a codeplug error. Is there a newer version of the software? How do I go by getting it? Any help will do.
Re: CPS for CP200
Posted: Sat Aug 04, 2007 4:49 am
by Bat2way
As stated by escomm in the above post, version R05.06 (RVN4191KR) with Global Tuner version R02.13 is the latest CPS. With radios continuing to have minor firmware updates, you will eventually be left on the "radio not supported" roadside using older versions.