Batboard

Any one have to install a AVA in a Jeep Grand Cherokee?
How did it work out and were did you install it?

I have come up with an idea. I need the dimensions of an AVA with the mounting bracket. If any one has that info please let me know.

Thanks

overall length is 10", not including mated connectors (add 2")

width at trunnion is 7.5" (add a couple inches for allen wrench to install screws.
add 3/4" to 1" at front right for actuator lever, and 2" on front left for key access.
venting required on upper left side of unit. mic jack is on left side near rear.

height of AVA is 3.125", not including trunnion. trunnion adds about 1.5" (flat) on bottom, or top, max 2" at full tilt.

trunnion mounting holes on AVA are 5" from front, and 1.5" from top and bottom. threads look to be 5/16..

trunnion offsets ~1.5" from center of mounting hole to center line of trunnion.
trunnion width is 6.1" mounting holes are on center line (long dimension) +/- 1.8" from center of trunnion and at +/- 0.4325" from centerline at center of trunnion and +/- 2.7"