gm300 install on bmw bike wiring question
Posted: Fri Sep 22, 2006 3:49 am
HI,
I want to install a GM300 on a BMW bike which is not a big problem to start with. At first I thougth just to move the mic with an ext cord from the rear radio box to the front of the bike and do the same with the speaker by connetting it to the ext connector.
But now that I have a helmet with bild in earpieces and mic it will be much better to use this in combo with a PTT buton.
I have a connector in the fairing for the pigtail cord to the helmet.
What I need is a specific wire diagram which includes the wiring to the earpeices(speakers), mic and PTT button hooked up to the ext connector on the GM radio. (f.e does the ptt wire connect to ground or the mic ??)
In the radio programing I set the function of the ext connector to 'remote', is this the correct default or should it be different ??
I hope someone can help me on this and email me a schematic (or photo of it)
Thanks,
Patrick
I want to install a GM300 on a BMW bike which is not a big problem to start with. At first I thougth just to move the mic with an ext cord from the rear radio box to the front of the bike and do the same with the speaker by connetting it to the ext connector.
But now that I have a helmet with bild in earpieces and mic it will be much better to use this in combo with a PTT buton.
I have a connector in the fairing for the pigtail cord to the helmet.
What I need is a specific wire diagram which includes the wiring to the earpeices(speakers), mic and PTT button hooked up to the ext connector on the GM radio. (f.e does the ptt wire connect to ground or the mic ??)
In the radio programing I set the function of the ext connector to 'remote', is this the correct default or should it be different ??
I hope someone can help me on this and email me a schematic (or photo of it)
Thanks,
Patrick