Page 1 of 1
PTX1200
Posted: Sun Sep 24, 2006 2:57 pm
by RoundnRound
I have a PTX1200, well, what I believe to be a PTX1200, Model#H01KDD94N4A. I have the 1200 Series RSS, version 03.03.00. I read the radio then get an error after it is read stating that the codeplug is not supported. Am I using the correct rss? My cable/rib are good. Any help would be appreciated.
Steve
Posted: Sun Sep 24, 2006 6:04 pm
by RoundnRound
Ok, I was able to read it with the 1200 Series RSS getting the following error: Codeplug Spec Number Not Supported By This RSS.
Steve
Posted: Mon Sep 25, 2006 5:50 pm
by RoundnRound
anyone?
Posted: Mon Sep 25, 2006 6:06 pm
by dxon2m
Isn't that a MPT1327 radio? I presme you need some special RSS that is built on that platform...?
Posted: Tue Sep 26, 2006 4:14 am
by RoundnRound
Yeah it is, I think... I thought the GP1200 RSS was the correct one...I guess not...
Posted: Wed Sep 27, 2006 5:13 am
by RoundnRound
Ok...i'm really starting to get pissed at this thing... I've tried everything I can think of and no go..... ereeerrrrrrrr......
Steve
Posted: Wed Sep 27, 2006 11:57 pm
by Andreas
If you don´t need the trunking mode,flash it into a MT2100.
The MT2100 will have 250 channels and select 5.
Andreas
Posted: Thu Sep 28, 2006 4:22 am
by RoundnRound
Andreas,
How do I flash this bad boy into an MT2100?
-Tony
Posted: Thu Sep 28, 2006 10:26 pm
by Andreas
Look at my homepage for the procedure.
Andreas