Page 1 of 1
Kenwood TK-706 programming?
Posted: Mon Sep 25, 2006 1:12 pm
by radio_05
I have some Kenwood TK-706 radios, VHF conventional 2-ch, It seems these weren't very popular, and there isn't much programming info available. There is a switch on the solder side of the logic board inside the radio. Pressing this at power-on seems to put it into a programming mode.
I haven't had any success with KPG-6D software for the TK-706D series radios. Any ideas?
Posted: Mon Sep 25, 2006 1:57 pm
by xmo
Please review the board FAQ's regarding off topic posts.
"Off Topic Discussion Policy
This board was created to facilitate discussion around Motorola communications equipment, specifically land mobile radios, site infrastructure, consoles, etc. With this in mind, we aim to keep off topic discussion (other manufactures, jokes, eBay links, and other such distractions) off the board.
If these topics appear, they will be immediately locked by a moderator.
...
3) Questions about other manufactures radios or equipment. You can visit the Radio Information Board (
http://radio.the161.net) if you would like to get information on other equipment available. "