CPS Not reading MTS2000 5.01 or 5.13/14

[bigwrigg]

Anybody out there, other then me, having problems with the CPS for MTS2000 NOT reading uints with 5.01, 5.13 or 5.14 firmware in them? Out of about the last 200 radios my shop has worked on I am left with about 7 units that will not read on the windows CPS.
I hvae tried CPS 1.09, 1.11 and 1.13 with no luck. Just recieved my upgrade from Mother M to 2.01 with no luck. 6 months ago when I was on the phone with support in regards to a SRN on a XTS5000, I was told they were aware of the 5.xx glitch and were trying to fix it with the new software but that was all he knew since the XTS and MTS units fall under different catagories within Motorola.

I am pretty sure I will either have to dig out an old computer and try the DOS software we used to use, or send them to M for a firmware upgrade.
Does anybody out there know of a SRN that will cover this issue, or has anybody found a work around.

[MotoMax300]

Dos worked on the few I had troubles, firmware updates do to, my customers just wanted us to use dos, less expensive on them.

[AEC]

I would try RSS DOS version R06.07.

My MTS2000 could not be read with version R06.04, it was too old according to the error message, I had to use R06.07 and that took care of the problem.