Batboard

hello! I need to connect the software wintone to the radius cdm1250 where I locate the descriminator point to detect in the best way the tones ctcss English so bad it excuses translated with power translator


-------------------------------------------------------------------------------

hola ! necesito conectar el software wintone al radio cdm1250 donde ubico el punto de descriminador para detectar de la mejor manera los tonos ctcss disculpe el ingles tan malo traducido con power translator

Pin 11on the 16 pin option plug will give you discriminator audio when properly configured in the accessory configuration in the CPS.

ve3nsv wrote:Pin 11on the 16 pin option plug will give you discriminator audio when properly configured in the accessory configuration in the CPS.

thank you!! I go to make the test me to be working in the modification of the wintone to use it as an economic system of identification for a fleet of taxis
[img]ftp://reyesitoftp.sytes.net/download/Va ... intone.jpg[/img]

so you are using CTCSS tones to identify the units, rather than something like MDC or fleetsync? What kind of radios are in the fleet?

yes to be using ctcss to identify each taxi individually the reason is for that the radii don't possess identification mdc neither any similar one they are radios m100 sm50 m208 , kenwood's ,vertex's without identification. then modify the executable one and dlls of the wintone to assign him the number in particular from taxi to each tone ctcss.
also estoi designing a filter passes band to avoid interference of the modulation on the tone ctcss to connect it intermediarion between the wintone and the radius. all this is not tests you if it is a feasible design.