Batboard

I have two 2001 vintage MTS2000 model I radios. I want to keyload them with a T3011BX. Will the radios work with a version "B" loader?

Also, I bought the Jedi keyloader cable from /\/\ (model 3030984C007), but did not receive the familiar MX style plug on the KVL end. Instead I got a real heavy duty five pin din plug with a threaded sleeve on the outside. What is this cable designed to connect to? Does the KVL3000+ use this type of a connector? Can anyone provide me a pinout for this connector so that I can make a cable that will fit a T3011 keyloader? Sorry for all of the questions, but I can't seem to find this info.

If I knew the pinout for the radio connector, I could work backwards from there, any info will help.

Craig

First of all your radios must be equipped with the DES-XL (DES may work too) board to work with the 3011 keyloader. For the MTS series I believe the keyloader must be a C or D revision. I don't think B will work. You ordered the wrong cable for the keyloader. Im sure someone will pipe up with the correct part # for it.


Jason

Yes, I have the modules in the radios. I ordered the part number that was referenced by another user on the discussion board and out of the MOL catalog. The description is JEDI keyload cable.

I just looked at my cable, here is the info:

Item Number. TDN9390D
CABLE KEYLOAD MTS2000
Unit of Measure: 1 EA

List price

82.50

Ahhh, if only I would have known that stupid part number when I placed the order. Thanks for the info. Now I need to see if /\/\ will take back this stupid cable. Anyone know what this could possibley be used for? Jedi connector with all of the pins except RF and a five pin din plug on the other end with a threaded sleeve on the outside. Product description is JEDI keyload cable. Keyload with what?