Page 1 of 1
Q: Do you want to extract tuning data out of radio (MX2000)?
Posted: Fri Oct 06, 2006 12:34 pm
by wireless.friendly
Hi all!
What mean question Do you want to extract tuning data out of radio? Y/N when I try programm codeplug to radio? Radio is MX2000.
I try both variants - YES and NO. Doesn't see any differencies!
May be I lost (erase) factory turning data of my radio?
Please explain it and also please explain what mean this option!
Posted: Sat Oct 07, 2006 10:07 am
by wireless.friendly
Do not trust to my eyes - really nobody know? Saber RSS don't asks Do you want to extract tuning data out of radio? Y/N before programming?
Posted: Sun Oct 08, 2006 11:15 pm
by Andreas
If you choose "Yes",you will tune the radio with the tuning data from the radio.
If you choose "no",you will tune the radio with the tuning data from the loaded codeplug.
The original tuning is only overwritten,when you used a codeplug from another radio,to program it and you used "no".
Andreas
Posted: Mon Oct 09, 2006 8:51 am
by wireless.friendly
Andreas wrote:If you choose "Yes",you will tune the radio with the tuning data from the radio.
If talk simpler, radio will be programmed
without changing of tuning data?
If you choose "no",you will tune the radio with the tuning data from the loaded codeplug.
Saber's codeplug contains inside tuning data? Ohhh, I thinks that codeplug have only user data, not a serivce data like tuning values.
The original tuning is only overwritten,when you used a codeplug from another radio,to program it and you used "no".
Ok, many thanks!