Page 1 of 1
MTS2000 & QCII
Posted: Sun Oct 15, 2006 3:37 pm
by n9ysu
I have a VHF MTS2000, Model - H01KDH9PW1Bn Flash Code 230008-106000-0 Firmware 06.27... I have my QCII tones set up for decode, but I'm guessing I'm overlooking something simple.. I can't find where in the CPS (1.10) to set up a channel for QCII decode... any help?
Posted: Sun Oct 15, 2006 4:12 pm
by wavetar
In each conventional personality, go to the "signalling" tab and choose QCII for the "signalling type".
Todd
Posted: Mon Oct 16, 2006 3:20 pm
by n9ysu
well.. thats what I thought.. but when I go to the tab... I can choose MDC or GE STAR...but QCII is there to set up...
Posted: Mon Oct 16, 2006 3:58 pm
by wavetar
Hmm, send me your codeplug & I'll have a look:
[email protected]
Posted: Wed Oct 18, 2006 4:31 pm
by n9ysu
well.. Todd gave it a look-- (thank you)... and we're still stumped.. anyone else?
Posted: Wed Oct 18, 2006 4:46 pm
by MotoMax300
send it to me please, ill look,
[email protected]
Posted: Wed Oct 18, 2006 5:08 pm
by n9ysu
on it's way
Posted: Thu Oct 19, 2006 5:14 am
by Mfire39
Ok, try this... Under the signaling tab, leave the Signaling type set to "None", and set the System Number to "1". For some reason, QCII will not show up under the regular Signaling type, but by selecting System number and assigning it to the QCII system you want to use, it will work and decode. Give it a try.
-Marc
Posted: Sat Oct 21, 2006 1:15 pm
by n9ysu
Ok.. defying all logic... the last idea worked. (leaving the type & none & selecting the system..)... WHY... I don' t know... but by golly .. .it did... Thanks for all the input!!
Posted: Sun Oct 22, 2006 5:54 am
by wavetar
Well well, I still learn something every day in this field. Thank you Mfire39.
Todd
Posted: Sun Oct 22, 2006 6:51 am
by Mfire39
Always glad to help!
-Marc