gm 300 error 58 wrong radio codeplug

ik8dxq · Post by **ik8dxq** » Wed Oct 25, 2006 7:30 am

Motorola gm300 type m33gmc model n. m33gmc20d2aa
this unit powers up, transmit, receive ok audio tx, ok audio rx, but when i read it it says error 58 wrong codeplug ????
I have another similar unit, same moel and that one i can read and program perfectly, so I assume my rss, computer and rib are ok.
Any idea, or someone that can point me in the right way?

Many Many thanks in advance
73, Marco, ik8dxq

ik8dxq · Post by **ik8dxq** » Wed Oct 25, 2006 7:33 am

post scriptum:
my software is gm300 r04.00.00
thx

kcbooboo · Post by **kcbooboo** » Wed Oct 25, 2006 7:53 am

With some radios, if you write a codeplug to it with newer software, your older software will not be able to read that codeplug again. This could be your problem. I think there's a R05 version for the GM300, and a previous owner might have used that to write to the radio. If so, your only cure is to obtain that version.

Bob M.

smile@2006 · Post by **smile@2006** » Wed Oct 25, 2006 9:26 pm

Load archieve codeplug model M33GMC20DAA,
then clone to the gm300 with error 58.
Try and try again until success.

e=mc2

gm 300 error 58 wrong radio codeplug

gm 300 error 58 wrong radio codeplug

Cloning Codeplug