Batboard

For some odd reason my mostar decided to just stop transmitting. It has always worked for years and now it just wont. It recieves fine but wont TX. Any ideas?

Does anything happen when you try to TX?

bad mic? bad pa?

First thing that comes to mind is a bad mike cord.

Does the red TX light come when you press the PTT button?
If the red light does not light up then I would suspect a bad mike or bad cord.

A second problem is dirty contacts for the RF PA. This is usually cured by pulling the PA off and cleaning the contacts with some Deoxit

Problem found! I had a few pins crossed for some reason

Thanks for the help!