Existing Astro Spectra remote cable etc. w/ XTL5000?

Post by **akardam** » Tue Nov 07, 2006 9:32 am

I was wondering, as I have several existing Astro Spectra's setup in my truck with the remote mount kit, what possibility would exist in using part or all of the remote kit with an XTL5000 at some point, if I chose to go that route.

Is the Astro Spectra style head electrically compatable with the XTL's? Also could the existing remote mount cable be used in any fashion?

spectragod · Post by **spectragod** » Tue Nov 07, 2006 9:50 am

akardam wrote:I was wondering, as I have several existing Astro Spectra's setup in my truck with the remote mount kit, what possibility would exist in using part or all of the remote kit with an XTL5000 at some point, if I chose to go that route.

Is the Astro Spectra style head electrically compatable with the XTL's? Also could the existing remote mount cable be used in any fashion?

The remote cables are the same as the Spectra/Astro Spectra, the mounting cup for the remote head is the same except for the color & the Astro head will interchange as well (once again, color being the only difference).

The remote board on the radio is different as it uses a flex to connect to the transceiver rather than a set of pins.

I can't really see an advantage to going to the XTL over the Astro Spectra if you are planning on keeping the same head etc.. The good news is that the Astro Spectras are going down in price and coming up in availability.

SG

bellersley · Post by **bellersley** » Tue Nov 07, 2006 2:53 pm

If you need any XTL interconnect boards (remote mount), I have a few kicking around.

spectragod · Post by **spectragod** » Tue Nov 07, 2006 6:44 pm

I have a few as well, mid power units.

SG

Post by **akardam** » Tue Nov 07, 2006 8:48 pm

This would be the board + dual port DB25 on the front of the drawer, eh? I take it that the Astro Spectra remote interface board would not work?

spectragod · Post by **spectragod** » Wed Nov 08, 2006 4:55 am

It is different, it uses a flex rather than a set of pins to plug into the RF deck.

SG

Post by **akardam** » Wed Nov 08, 2006 7:50 am

Right, but it serves the same purpose, e.g. it replaces the control head on the front of the drawer and gives the remote cable somewhere to plug in?

spectragod · Post by **spectragod** » Wed Nov 08, 2006 8:15 am

akardam wrote:Right, but it serves the same purpose, e.g. it replaces the control head on the front of the drawer and gives the remote cable somewhere to plug in?

yes

SG

Existing Astro Spectra remote cable etc. w/ XTL5000?

Existing Astro Spectra remote cable etc. w/ XTL5000?

Re: Existing Astro Spectra remote cable etc. w/ XTL5000?