Page 1 of 1
Programming the Pro 2150 with PL
Posted: Sat Dec 02, 2006 10:20 am
by Chrome69
I got my hands on the Pro 2150 and trying to put in some Ham repeater frequencies and a few have PL and i have tried they code and it doesn't work.. for example for 103.5 PL i have put in the Motorola code of 014 but it still doesn't work any suggestions? Yes anything else i have programmed in has worked fine just the PL...
Anyone know of any mods for this radio maybe to expand the range?
Brian
Posted: Sat Dec 02, 2006 12:46 pm
by HLA
the tpl code for 103.5 is 1A. 014 would be a dpl but it's not a motorola dpl. the lowest motorola dpl is 023. unless you meant 114? change your squelch type to tpl and just put 1A in the code box under it.
Posted: Fri Dec 15, 2006 5:37 pm
by Chrome69
i still can't get it to work would that be programmed while programming the actually bank? Sorry the manual is very limited on doing this...
Posted: Fri Dec 15, 2006 5:43 pm
by Rayjk110
Most scanners don't do the Motorola " PL " codes; you just have to enter the PL as it is.
Posted: Fri Dec 15, 2006 10:30 pm
by HLA
are you talking about some scanner or a motorola pro2150?
Posted: Sat Dec 16, 2006 2:45 pm
by Chrome69
the Motorola Pro 2150, if i was talking about a RS scanner i would have posted it on radio Reference, not here...
I can't find where to ajust the Squelch Type and the manual is very limited on what things are..
yes you are correct type error 114
It wont take the 103.5 for a PL and again i can't get it to do 1A