Batboard

Posted: **Thu Dec 21, 2006 12:50 am**

Hello!

Maybe you guys can help me. I tried to flash my GP1200 in a MTS2100.

I used Wookie to program a new codeplug -> error02

Then I used Skywalker-Upgrade utility to flash the radio, ending in a message that the upgrade was succesfull, but it was not

.

The Radio is now showing "ICP VER XXXXXX" in it's display and has strange power-off (needs minutes to turn off).

I don't have an idea what went wrong. Any help appreciated.

Thanks,
Stephan

Posted: **Thu Dec 21, 2006 12:39 pm**

Did you select the correct model to be flashed in Skywalker? If you flashed the wrong firmware(and/or a combination with the wrong codeplug), strange things will be the result...Also, Wookie is not the most stable programming platform.

Ed

Posted: **Fri Dec 22, 2006 1:42 am**

Hi!

Thanks for your help.
I reprogrammed the (same) codeplug and the radio is alive now.
Maybe Wookie made a mistake at the first time...
Now the radio works fine...

Posted: **Fri Dec 22, 2006 3:27 am**

Right,

Typical Wookie error. Reprogramm the same codeplug and it's working fine....
Try backing up this codeplug in MT(S)2100 RSS to be on the safe side!

Ed

Batboard

"ICP VER XXXXXX" -ERROR (GP1200 -> MTS2100)

"ICP VER XXXXXX" -ERROR (GP1200 -> MTS2100)