Page 1 of 1

RSS on a Modern Computer

Posted: Fri Dec 22, 2006 7:13 pm
by fogster
My programming PC seems like it's getting ready to kick the bucket. Rather than sinking money into a really slow computer, I'm wondering if the following versions of RSS have fixed the 'timing loop bug' and will now run on my desktop machine (dual 1.4 GHz Athlons). (I know, I need real DOS. This isn't an issue.)

I use:
- GP300/350 RSS, R08.02.00
- ASTRO Portable RSS, R09.05.00
- Saber RSS, R07.01.00

Will all 3 of these work on a modern PC, or should I work on fixing up the old computer?

Posted: Fri Dec 22, 2006 7:46 pm
by Rayjk110
I would fix up the old computer.


The chance of running Saber RSS on a 1.4GHz computer is like a snowball's chance in hell.

As for the ASTRO Portable RSS, get ASTRO CPS. That would run just fine on newer stuff.

Posted: Fri Dec 22, 2006 8:09 pm
by HumHead
Take a look here for the actual Motorola Pentium Compatibility Matrix:

http://batboard.batlabs.com/viewtopic.php?t=52894

A lot of the later versions are just fine.

Posted: Fri Dec 22, 2006 11:58 pm
by mr.syntrx
ASTRO RSS runs fine on newer machines. In fact, it really, really sucks on old machines, so by under no circumstances would I recommend it. Changing the RX signal type on conventional personalities or verifying a codeplug takes a couple of minutes on my 150MHz Gateway, whereas it only takes a few seconds on my 2.4GHz machine.

I run Saber RSS R07.01.00 on a Pentium 4 2.4GHz machine, with no problems.