Page 1 of 1
The dreaded 254.1 PL Tone. . .
Posted: Wed Dec 27, 2006 11:15 am
by Pimpala03
Does anyone know if a M100/M126 will take a 254.1 PL tone?
Further more... Which of the mobiles DO and DON'T take this tone? I've tried a Maxtrac before that would not. One of my local system takes this tones and kinda puts a hinderance on what radios I can buy.
So far most Kenwoods are out while, most of the Vertex models take it.
As for Motorolas, I know that the Maratracs, M1225s, GM300s, and CM300s are all good to go. Besides brand new top of the line radios, what's some of the older stuff (think - used market) radios that would work?
Posted: Wed Dec 27, 2006 7:58 pm
by RFguy
Sorry I can't help with your exact question, but had some input.
We have found PL tones above about 225 Hz to start to have a low level buzz on the receiving radio. I assume it is a function of the high pass filter.
If it a new system, you want want to keep the tone a bit lower.
I am guessing this is an existing system, so I will let others try to answer your question.
Posted: Wed Dec 27, 2006 8:07 pm
by Pimpala03
It's not my system. I do not have control over it. The buzzing and star wars sounds are VERY annoying.
Posted: Thu Dec 28, 2006 7:08 am
by USPSS
Aw, another Motorola gotcha from long ago. This is a non-standard tone like one or two others therefore for years we would not support non-standard tones. We do support 254.1 but you have to enter the value since it is not in the pull-down.
Enter the value directly and it works on Kenwood radios.
The filters leak somethimes on this tone but also on Motorola.
Stan
Posted: Thu Dec 28, 2006 11:11 am
by Pimpala03
I'm not familiar with you, I guess... Who is "we"?
Which Kenwood radios will allow typing it in? I'm trying on a Kenwood 370G and it's not letting me type it in. It beeps and kicks it out.
Posted: Thu Dec 28, 2006 12:36 pm
by thebigphish
the x80 & x180 series all do, and i will have to try the x90s at the other house to check.
Posted: Thu Dec 28, 2006 1:54 pm
by Will
Pimpala03 wrote:
I'm not familiar with you, I guess... Who is "we"?
The 'we' USSPSS/ Stan speaks of IS Kenwood Land Mobile....
_________________
Stan Glass
Government & Entertainment Division Manager (Kenwood)
Posted: Thu Dec 28, 2006 3:54 pm
by USPSS
I am checking if that series of radio is capable.
Kenwood Windows software allows PL tones to be input in .1 increments anywhere from 67.0 through 254.1 so any non standard tone will work.
Posted: Thu Dec 28, 2006 5:04 pm
by Pimpala03
Good deal, thanks for the info.
Now, back to the Motorola products...
254.1 PL
Posted: Thu Dec 28, 2006 6:01 pm
by Hartley
Hi,
I went and checked a few for U..
Good to go:
System Saber
HT1000
Astro Saber
Astro Spectra
MCS2000
MTS2000
1225 series (P. M,.R)
NOT Good:
Analog Spectra (stops at 250.1 - M7)
73 DE Hartley
Posted: Thu Dec 28, 2006 6:15 pm
by ve3nsv
I have 5 M100's on my bench for a PM check and I will hook them up to the programming computer and check for you in the morning.
Posted: Thu Dec 28, 2006 6:43 pm
by Pimpala03
Thanks for the info guys.