Page 1 of 1
Motorola Pro-2150 Not accepting Narrow Band, any help?
Posted: Thu Dec 28, 2006 7:02 pm
by W3MOT
Hello, I'm having problems programming any frequencies that end in .0025 or .0075. Can anyone tell me how I can fix this problem? When I go to program in such frequencies, it rounds the freq off. I have the keypad programmable model. Thanks.
Posted: Thu Dec 28, 2006 7:31 pm
by Bat2way
Looks like an invalid programming frequency. In UHF, for example, 12.5 kc splits should end like this:
where 12.5 = .0xxx
.0125
.0375
.0625
.0875
Posted: Thu Dec 28, 2006 8:19 pm
by HLA
if it's rounding it up it won't do narrow band. it must be a vhf radio correct? the only way to fix it is upgrade the firmware or upgrade to a newer radio, the only problem is with that radio is it's not supposed to be in this country so i doubt if you'll get a motorola shop here to even work on it.
Posted: Thu Dec 28, 2006 8:31 pm
by W3MOT
Negative. It's a UHF radio.
Posted: Thu Dec 28, 2006 9:24 pm
by HLA
ok then this one has got me?
Posted: Fri Dec 29, 2006 5:37 pm
by W3MOT
Ok i've found out the problem... but can't find a solution.
The problem is the radio is not accepting Narrow band frequencies. Only wide band. However I cannot find the solution to this problem. I'll keep looking. I even restored the radio to factory settings and it continues to do it. It's a latin american radio. Would that make a difference? Thanks.
Posted: Sun Jan 07, 2007 1:43 pm
by W3MOT
Does anyone own this radio and have the same problems? Any solutions?
Posted: Sun Jan 07, 2007 5:02 pm
by HLA
you're gonna have to find a shop in south america, that radio isn't supposed to be here in the states and that's why we can't find any support for it. anything that i found on the internet for it was in spanish and i couldn't read it. and if what i did find was right that radio is like a gp68, it don't use any rss or cps for programming, it's front panel only.
Posted: Sun Jan 07, 2007 5:38 pm
by W3MOT
HLA wrote:you're gonna have to find a shop in south america, that radio isn't supposed to be here in the states and that's why we can't find any support for it. anything that i found on the internet for it was in spanish and i couldn't read it. and if what i did find was right that radio is like a gp68, it don't use any rss or cps for programming, it's front panel only.
I have a manual for it. It says it can be programmed using RSS. There's also a limited Keypad Model that Motorola makes that supports RSS as well...
Couldn't find anything in the manual about why it won't accept Narrow band, however.