Page 1 of 1
Fleet Sync on a Moto Console
Posted: Thu Jan 04, 2007 8:17 pm
by KDN
I know this is a motorola forum but what does it take to make a Moto Console to decode Fleet Sync??? Is there a software update??? Any info would help....
Posted: Thu Jan 04, 2007 8:22 pm
by tvsjr
Err, Fleetsync is a Kenwood protocol. You aren't going to find a Fleetsync decoder in a Moto radio any time soon.
Posted: Thu Jan 04, 2007 8:44 pm
by alex
Well, if you can tone remote a fleet sync radio into the motorola console - there's no reason why it wouldn't work. However, if the basic functions required for a tone remote to work are unavailable as outputs on the radio - your chances are minimal.
Posted: Thu Jan 04, 2007 9:09 pm
by n7maq
We us a Cimarron decoder with the Moducomm consoles. I would try them.
http://www.cimtechcorp.com/
Jim
Posted: Sat Jan 06, 2007 6:00 pm
by KDN
In a large county center with multiple channels, is a decoder required for each channel or one decoder for multiple channels???
Posted: Sat Jan 06, 2007 6:23 pm
by n7maq
KDN wrote:In a large county center with multiple channels, is a decoder required for each channel or one decoder for multiple channels???
In our case we use one for each channel, then send the info to the console screens.
Jim