Page 1 of 1
Strange X9000 cable
Posted: Tue Jan 09, 2007 5:41 pm
by ki4cye
http://s132.photobucket.com/albums/q7/k ... 00%20part/
Can anybody identify this cable? It came with a system 9000 DEK. Part # HKN6189A. It appears to be genuine Motorola part. Round end has nine pins and the other end looks like a Mic plug.
Posted: Tue Jan 09, 2007 11:19 pm
by WB6NVH
That may be a headset/boom-mike adapter for the David Clark noise cancelling headsets used on fire engines...
Posted: Wed Jan 10, 2007 5:43 am
by kb0nly
It's hard to tell in the second picture, what does the other end have?
It comes up on MOL as..
Item Number. HKN6189A
CABLE, CH DEK $20.75
Posted: Wed Jan 10, 2007 6:23 am
by akardam
The interesting part is it came with a DEK, and it says it's for a DEK, but the only thing that uses the 6 pin port on a dek is the connector between the DEK and the control head... e.g. VIP port on control head goes to 6 pin connector on DEK, and DEK's VIP port is now active...
Is it possible it's a cable intended to interface a DEK with a non-Motorola or even a non-Systems 9000 style head?
Posted: Wed Jan 10, 2007 7:38 am
by GlennD
The dek box end is the mic connector. The other end looks like it plugs into a XTL control head.
Posted: Wed Jan 10, 2007 9:48 am
by akardam
Interesting... anybody familiar with the DEK provisions for the XTL O series heads?
Posted: Wed Jan 10, 2007 12:58 pm
by ki4cye
Sorry,I forgot to say that I bought the DEK on ebay.
It came with all mounting hardware and proper cable and vip 2 plug to hook to my x9000 head.
If it's for a boom mike I may look into using it on a maratrac I plan to set up as a base for amateur use.
Posted: Wed Jan 10, 2007 3:26 pm
by GEMOTO
The circular connector plugs into the back of the newer XTL series control heads and onto the radio drawer itself. Usually the remote cable has a blue band with the same circular connector on each end. The power, speaker, ignition sense has a red band. There is a yellow connector but I do not know what its used for (DEK maybe?)