Batboard

Posted: **Wed Jan 10, 2007 3:21 pm**

I bought a gamber john ds-132, and all the other crap to go with it.

http://www.gamberjohnson.com/?p_id=67&prod_id=1119

Now reading gambers site, I see this

Installing this base into 2004-2006 Dodge Durango vehicles will compromise the vehicle airbag safety system, possibly endangering vehicle occupants. Seat bolts in 2004-2006 dodge Durango are tied into the airbag sensor system. Loosening or removal of the seat bolts in the 2004-2006 vehicles will require recalibration by a certified Daimler Chrysler service technician.

Fracking Dodge won't do it. I called a few dealers today.

Any thoughts here guys? (aside from, your shouldn't have bought a dodge)

Posted: **Wed Jan 10, 2007 4:15 pm**

Also seen this on a website selling Jotto-Desk products:

WARNING! DO NOT MOUNT TO 2005-2006 DODGE RAM TRUCKS
2005-2006 Dodge Ram passenger seat bolts may contain air-bag weight sensors.
This vehicle mount would require removal and replacement of seat rail bolts.
When seat rail bolts are moved, the sensors must be re-calibrated by an Authorized Dealer

http://www.trissellcomputers.com/jotto_chrysler.htm

We install Troy C06 consoles in quite a wide range of vehicles, thank god we don't have any Dodges. I guess it's smart to get into the habit of checking for new stuff like this every model year...

Posted: **Wed Jan 10, 2007 4:20 pm**

screw dodge

Posted: **Thu Jan 11, 2007 1:27 am**

Console.

Batboard

laptop mount in 2004 duango?

laptop mount in 2004 duango?