Page 1 of 1
MDC1200 Question
Posted: Tue Jan 16, 2007 3:33 pm
by Tron
Does anyone know if MDC signaling capabilities are std options for the SM-50/M120/M1225/Maxtracs? These are VHF of various vintage. Can you tell from the model numbers?
Tron
Posted: Thu Jan 18, 2007 9:19 am
by harrisjt2000
Yes all of those should have MDC capablilties as far as PTT-ID
Posted: Thu Jan 18, 2007 9:51 am
by escomm
No, the M1225 does not do MDC (at least not without an option board) and I don't think the SM50 does either
Posted: Thu Jan 18, 2007 11:19 am
by DPL
The SM50 doesn't, and I'm pretty sure the M120 will not either. The Maxtracs will only do MDC1200 if they are the high-signaling models; look for a 16 pin connector on the back below the antenna connector (as opposed to a five pin).
Posted: Thu Jan 18, 2007 12:25 pm
by wavetar
I second what DPL is saying...a definite 'no' on the SM50/M120/M1225 without a third party board, and a 'maybe' on the Maxtrac...it needs to be a 16-pin model board set-up as a 'high signaling' unit.
Todd