Page 1 of 1
mt1500 battery question
Posted: Mon Jan 22, 2007 2:01 pm
by nh7cy
hello,
so is the mt1500 battery compatible with that of the ht1250 or any other waris series radios or do i need a whole new battery?
Posted: Mon Jan 22, 2007 2:05 pm
by Grog
Not compatable
Posted: Mon Jan 22, 2007 2:39 pm
by alex
Not 100% true.
You'll notice on the MT/XTS 1500/2500 batteries that the contacts are in a different place, but most waris (ht750/1250/1550) batteries contain two sets of contacts. Placing a waris series battery on a MT/XTS will result in a perfectly working radio. You'll note the battery indicator however, will not work. (It may if it's a Waris impress battery, I don't have one, so I can not speak to that).
Now, Look at the 1500/2500 battery. You'll notice that the label goes all the way up to just under the bottom contacts.
Here's where you void the warranty of the battery:
Peel back the label, and you will discover a second set of contacts just under the sticker.
You can then use the battery on both the 1500/2500's and on the 750/1250/1550 series radios.
NOTE: This will probably violate any FM or IS ratings that the battery is rated for, voids your warranty, eats your french fries -you get the idea. if you do this - do it to your own equipment and consider the environment in which you use it.
-Alex
Posted: Mon Jan 22, 2007 2:55 pm
by nh7cy
hmm, thanks. that what i figured being that the waris battery has two sets of contacts. well, this radio wont be used in a grain silo or nuclear weapons manufacturing facility, so hopefully it should be okay.
i was just wondering as the original battery got squashed by a car, or atleast thats the info i recieved by the seller, and i figured i could pop my nice new waris slim pack onto it.
thanks for all the info!
_________jason. nh7cy.
Posted: Mon Jan 22, 2007 3:50 pm
by Grog
My bad, I was thinking of something else. Always good for more than one answer
