Page 1 of 1
TX Tone?
Posted: Sat Feb 03, 2007 10:20 am
by nickvann
I have some HT1250's. Some I have used had an alert tone that would sound when you pressed the TX button. It wasn't a single tone, more like a "ring"... This would only be heard on the transmitting radio, not the receiving. Can anyone tell me what this was, or how to enable it again. It was handy, because it would let people know there were transmitting, even if by accident.
THanks
Nick
Posted: Sat Feb 03, 2007 10:24 am
by CTAMontrose
i would wager those were HT1250-LS radios on an LTR system, the sound you heard would have been a talk permit tone.
Posted: Sat Feb 03, 2007 11:24 am
by nickvann
Is it possible to use a tx alert in talkaroud on the LS version?
Is this alert aval. on the HT1250 (not ls)
Posted: Sat Feb 03, 2007 6:08 pm
by mr.syntrx
No, unless you have MDC1200 pre ID, with sidetone enabled. It won't be the same chirping sound though, it'll be a solid beep.
Posted: Sun Feb 04, 2007 7:58 am
by nickvann
How do I enable that sound on an LS model?