Page 1 of 1
atro spectra programming
Posted: Fri Feb 16, 2007 11:01 am
by fire_master_21
I have a high power W4 that I am trying to program. I built the cable as shown on B.L. I am running CPS 4.something. and a factory RIB pluged in to the wall. I hooked everything up and try to read the radio and the CPS keeps saying can't comm with radio. any ideas?
Posted: Fri Feb 16, 2007 11:06 am
by jmr061
Does the rib power up without the battery or AC plugged in? The mobile should power the rib if you made the cable right.
Jason
Posted: Fri Feb 16, 2007 11:08 am
by fire_master_21
didn't even think of that i will go see
Posted: Fri Feb 16, 2007 11:30 am
by fire_master_21
well go it to work now. This is only the second spectra i have had are they that picky on rib power? the cable worked without the wall and battery but as soon as I had d/c'd them i was able to read the radio.
Posted: Fri Feb 16, 2007 2:47 pm
by Bruce1807
should work with just the cable> I have never had a prroblem doing it that way.