Page 1 of 1
CODEPLUG REQUEST: CDM1250 UHF 403-470
Posted: Wed Feb 21, 2007 6:30 am
by kb1nuo
I have a CDM1250 AAM25RKD9AA2AN from eBay with a bad codeplug. Can anyone help me out finding a working one please?
edit: fixed model number and bandsplit
Posted: Wed Feb 21, 2007 8:39 am
by HLA
your radio is not a 450-512, it's a 403-470. if it was the high split like you poste the model number would be aam25skd9aa2an
Posted: Wed Feb 21, 2007 10:00 am
by kb1nuo
Fixed the bandsplit in the title, thanks.
Re: CODEPLUG REQUEST: CDM1250 UHF 403-470
Posted: Fri Mar 16, 2007 5:24 am
by kb1nuo
kb1nuo wrote:I have a CDM1250 AAM25RKD9AA2AN from eBay with a bad codeplug. Can anyone help me out finding a working one please?
edit: fixed model number and bandsplit
Still not much luck with this radio. After playing with the programming and tuner a bit I've gotten it to RX OK, and it does transmit OK power, just no audio or PL/DPL regardless of the mics I've tried. Can anyone help me out?
Posted: Fri Mar 16, 2007 2:22 pm
by ve3nsv
If you want you can e-mail me the codeplug at
[email protected] and I will have a look?
Posted: Fri Mar 16, 2007 5:23 pm
by nmfire10
If you have it in scan, there is an option to have it not use PL/DPL in scan. In the scan list, set the PL Scan for Priority and Non-Priority. Also just uncheck the HOOK DEFEATS PL checkbox under basic.
Re: CODEPLUG REQUEST: CDM1250 UHF 403-470
Posted: Wed Jun 06, 2007 7:56 pm
by Gocart878
can someone send me a codeplug for a 403-470mhz cdm1250. i bought this off ebay and it has a password lock on it. i am to dumb to winhex this thing apart and would prefer just writing over a previous codeplug. email is
[email protected]. thanks