Batboard

Hi
Somebody e-mailed for help with mc micro
I told him to put
device=c:\dos\ansi.sys in his config and it loaded rss ok.
But I have had the following e-mail sent back

------------------------------------------------------------------------------

Thank you so much for great help. I have done the modification in my config.sys file and now my soft is OK. (thank you very much for help)

However, I cannot read info from the transceiver (Motorola MC micro). I have tried the entire different item in the software but in the when I read the radio, it run, like that:

Reading record 1, and then to 5 without any problem.

But at number 5: there is a sound and it is display:

ERROR: CHECKSUM INVALID

Well hope that you could help me?


For info my transceiver is:

Motorola GmbH UHF-H 20KHz

Model NR: MAU14EZA9J13AK

ZZF NR: A400327X UU

TYP NR: 14EZA/EVA

OPTION: B144

SERIEN NR: 186RRC2102

Made in Germany

-------------------------------------------------------------------------------
Any idea's from the great guys on here
Regards
billyboy

Hi
He has sorted it, It was corrupt rss.
Thanks