Page 1 of 1
Help!! Need codeplug for GM300 vhf
Posted: Tue Feb 27, 2007 5:09 pm
by shawnbastin
Anyone have a working codeplug for a GM300 vhf, model M43GMC09C2AA? I checked the supersite, but it only has UHF. Mine only has 4 channels programmed, so I'm wondering if my codeplug is hacked?? Thanks! Shawn stuartbastin (at) bellsouth (dot) net
Posted: Tue Feb 27, 2007 9:52 pm
by PETNRDX
It might have only needed 4 ch for whomever had it first.
They might only have had a license for four channels, etc.
Have you read the radio and gone to the MODE UTILITY to ADD MODES?
Posted: Wed Feb 28, 2007 12:12 am
by shawnbastin
got it to blank and was able to put in codeplug from another model, not quite the same version. It works. I'd like to still find one with the same channel spacing, but now it seems to be working. If anyone sends me a matching codeplug, I'll try it and see if everything works like it should.
Posted: Wed Feb 28, 2007 1:01 pm
by n5tbu
Sounds like it was programmed with hacked software,if so,you need that same hacked version..
mod
Posted: Wed Feb 28, 2007 4:33 pm
by PETNRDX
Check your PM's.
Posted: Fri Mar 02, 2007 1:01 am
by shawnbastin
it works with the wrong codeplug..but still can't be read. Can get to the eeprom data ok though...this is strange. Anyone got any ideas or another codeplug?