Page 1 of 1
MTS2000 Recieve Quality
Posted: Sun Mar 04, 2007 9:21 pm
by gatekeep
I'm curious, I have a front display MTS2000 and a top display MTS2000, the front display MTS2000 seems to receive poorly as compared to the top display MTS2000.
I tuned the squelch soft pots, and it helped a bit, but not a lot. Is there anything else that could be done?
Posted: Mon Mar 05, 2007 7:21 am
by RadioSouth
Alignment ?
Posted: Mon Mar 05, 2007 9:27 am
by gatekeep
We talking about, the front end filter alignment? Because Tx is almost perfect on the thing.
Posted: Mon Mar 05, 2007 3:36 pm
by Will
gatekeep wrote:We talking about, the front end filter alignment? Because Tx is almost perfect on the thing.
"front end filter alignment" is for the receiver. It needs to be properly aligned to get the best sensitivity out of the receiver. The "tuning values" vary from radio to radio, that is why they are adjustable.....
Posted: Mon Mar 05, 2007 4:29 pm
by gatekeep
Will, I understand that. Hence why I asked, I figured the front-end probably needs to be adjusted. Though, modifying the squelch levels was and is at the moment a temporary patch.
Posted: Mon Mar 05, 2007 5:34 pm
by OCSD117
Is the Antenna Connector loose at all? could be another possibility..then again TX would probably be poor too!