Batboard

this is my install in a 05 impalla X2 spectras remote head 1 vhf 1 uhf CB lol gps roof mount for laptop code 3 rls hl strobes and flashers fog light strobes tail light flashers and strobes red and clear dash light red led near mirror arrow stick with X2 drop down red/clear led lights and my own wire tray
i want this car

How are the control heads and the siren controller mounted? I see a lot of Velcro...

What brand/model & where did you get that equipment mounting shelf?
Nice job. I have a 2000 LS model and would like to find that shelf.

what is the opticom emmitter attached to

fineshot1 wrote:What brand/model & where did you get that equipment mounting shelf?
Nice job. I have a 2000 LS model and would like to find that shelf.

I also would like to know what kind of trunk tray that is.

he says it's his own...so my guess would be plywood...pics aren't enough to see the grain to see if it is.

Got any exterior shots of the car?

Pimpala03 wrote:Just curious why you have 2 six head strobe power supplies and are only using 6 out of the total 12 outlets...

Looks nice though.

Looks like one is 60 watts the one using 4 is 90 watts, maybe he doesn't want as much power for 2 lights?

FireCpt809 wrote:what is the opticom emmitter attached to

Third button up top on the Code3 controller

What light head is the opticom attached to?

LuiePL wrote:

Pimpala03 wrote:Just curious why you have 2 six head strobe power supplies and are only using 6 out of the total 12 outlets...

Looks like one is 60 watts the one using 4 is 90 watts, maybe he doesn't want as much power for 2 lights?

Or perhaps it so he can run a different pattern or so he can run 2x2x2 instead of 4x2.

sorry bout the long delay the board is a black plastic 3/4 inch thick then custone to fit the trunk plywood would hold in moisture so did not use it the optocom is hooked up in to my lower fog left side light it work from a good 5 city blocks away the power supply issue the more heads u have on the power supply the less power it produces i wanted the lighting to be bright and i have a 90 way to replace the 60 but never got the chance i have a 1/4 in thick aluminum piece of flat stock to hold up controls yes i do have the thick plastic velcro there but it was wwhen i had it in my pickup never took it off i say i am lazy on that one but hey i will get some out side video night and day

joparka wrote:sorry bout the long delay the board is a black plastic 3/4 inch thick then custone to fit the trunk plywood would hold in moisture so did not use it the optocom is hooked up in to my lower fog left side light it work from a good 5 city blocks away the power supply issue the more heads u have on the power supply the less power it produces i wanted the lighting to be bright and i have a 90 way to replace the 60 but never got the chance i have a 1/4 in thick aluminum piece of flat stock to hold up controls yes i do have the thick plastic velcro there but it was wwhen i had it in my pickup never took it off i say i am lazy on that one but hey i will get some out side video night and day

Punctuation and capitalization are your friends!!

Sorry bout the long delay. The board is a black plastic 3/4 inch thick then custom to fit the trunk. Plywood would hold in moisture so did not use it. The optocom is hooked up in to my lower fog, left side light it, works from a good 5 city blocks away. The power supply issue, the more heads you have on the power supply, the less power it produces. I wanted the lighting to be bright and I have a 90w to replace the 60w but never got the chance. I have a 1/4 in thick aluminum piece of flat stock to hold up controls. Yes I do have the thick plastic velcro there but it was wwhen I had it in my pickup, never took it off . I say I am lazy on that one, but hey. I will take some outside video , night and day.[/b]