MTS2000 VHF s-record

WB4JGI · Post by **WB4JGI** » Wed Mar 14, 2007 5:54 pm

I've got a VHF Full Keypad MTS2000 and I have a need for Multikey and MDC stat alert. Is all I need a s-record with Multikey and MDC and the correct software to force it into the radio and hopefully should aquire those features? Oh almost forgot the Firmware is v5.41

High_order1 · Post by **High_order1** » Thu Mar 15, 2007 1:41 pm

Oh almost forgot the Firmware is v5.41

Isn't that the firmware rvn when toolproofing started?

Otherwise, from what I have been able to glean, that's right, but when you force that S Record in, you also may force in the donor records' softpot setting, making you need to do some tuning.

.... so I've read. Others will know for certain.

-Shawn

Post by **Mfire39** » Thu Mar 15, 2007 4:34 pm

An S-Rec or regular plug will work fine... Just right down your tuning values before you dump in the plug, and you'll be good to go.

-Marc

WB4JGI · Post by **WB4JGI** » Fri Mar 16, 2007 4:37 am

OK, Does anyone have an S-Record with MDC Statalert and Multikey that they would be willing to share? Thanks to all those that replied, for your help.

motorola_otaku · Post by **motorola_otaku** » Fri Mar 16, 2007 8:47 am

High_order1 wrote:
Oh almost forgot the Firmware is v5.41
Isn't that the firmware rvn when toolproofing started?

According to the Batlabs MTSX page, toolproofing started with 5.42. He's right under the wire.

MTS2000 VHF s-record

MTS2000 VHF s-record

S-record