GM900 acting crazy

sb · Post by sb » Sat Mar 31, 2007 3:10 am

Hi!

I have VHF GM900 that I can programm and RX is also O.K.
But when I press PTT it starts to beep continously and green an red LED are flashing. If I push buttons it returns to normal RX.
Any idea ?

Andreas · Post by **Andreas** » Sun Apr 01, 2007 11:43 pm

It looks like the PLL do not lock.
Did you programmed the radio out of the bandsplit?

Andreas

sb · Post by sb » Mon Apr 02, 2007 3:23 am

Hi!

It is programmed from 145 to 170 MHz same think on any frequency.

Andreas · Post by **Andreas** » Mon Apr 02, 2007 4:36 am

Write your tuning parameters down and program the radio with a default codeplug,but I think you have a hardware problem in the PLL part of the radio.

I can give you a default codeplug and you only have to load it with
MTSX-Lab into the radio.After this retune the radio with the old parameters.

Andreas