Batboard

Trying to hook up a Pyramid svr200 to a Maxtrac could anyone tell we what the settings on the Maxtrac have to be set on

pin 4
pin 6
pin 8
pin 9
pin 12
pin 14

I'm not sure if your Maxtrac is trunking or not, but take a look at Pyramid's webpage. They have alot of info, even the programming software, instructions, and diagrams. If are not aware the SVR200 can be programmed with a Vertex VPL-1 cable.

http://www.pyramidcomm.com/svr200an.html

Mark