Page 1 of 1
part number for 3 watt cell phone
Posted: Sun Apr 29, 2007 11:35 am
by KitN1MCC
i need the part number for the extension cable from the brick to the handset the one with the screw mounting holes or if some one has one
Posted: Sun Apr 29, 2007 2:28 pm
by mikegilbert
I found SKN4070 which is the 2' model. And SKN4235 which is the 18' model. (note google can only find one reference to the 18' P#)
SKN4467A/ SKN4467 lists as a 16.05' data cable with no mounting bracket.
Getting ready for an XTVA install?
-Mike
Posted: Mon Apr 30, 2007 5:17 pm
by KitN1MCC
extension for cdm1250
Posted: Mon Apr 30, 2007 5:32 pm
by n7maq
The stock CDM is a 10 pin mic, but a 1056 will work just fine.
The cable you want is NLA. IIRC they were only $6.00, or $7.00 dealer cost. Kenwood also makes one, but it is over $25.00. I would just put a want add out for one. I recall just 5 years ago, tossing them into the trash all the time. Now save them when ever I see them.
Jim
Posted: Mon Apr 30, 2007 10:46 pm
by mr.syntrx
Otherwise, make your own out of a 4-pair phone extension lead, and one of those female-female joiners.
Posted: Tue May 01, 2007 6:43 am
by escomm
KitN1MCC wrote:extension for cdm1250
Like for a remote mount kit?
The data cables are RKN4077 (3m) RKN4078 (5m) and RKN4079 (7m)
Ps. They range from $5-10
Posted: Wed May 02, 2007 11:07 am
by KitN1MCC
yeah like a remote but just for the mike the Analog cell phone ones have a nice set of hole for screws